Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
During Operation
Do not run the engine at full throttle off
load. When run off load, the engine
reaches very high revs, which can cause
the temperature of the gearbox to rise
unnecessarily.
After Finishing Work
Storing machine for a short period:
Wait for the engine to cool down. Store
the machine with an empty tank in a dry
place, well away from sources of
ignition, until you need it again. Check
the tightness of all accessible screws
and nuts at regular intervals and
retighten as necessary.
Storing for longer period:
See chapter "Storing the Machine".
KW
Storing the Machine
For periods of about 3 months or longer:
:
Remove and clean the sweeping
attachments, inspect for damage or
wear.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
English / USA
Replacing Sweeper Drum
:
Straighten the ends of the cotter pin,
remove the cotter pin.
:
Pull the sweeper drum off the axle.
:
Repeat the procedure on the other
side.
:
Examine gear housing for signs of
oil. If leaks are found, have your
STIHL dealer check the gearbox.
:
Install new sweeper drums – see
"Mounting Sweeper Drums".
17
Publicidad
Capítulos
Tabla de contenido
