Pedals - Boss LOOP STATION RC-30 DUAL TRACK LOOPER Manual Del Usuario

Simplifying the Operation of the Built-in Pedals
If you want to restrict the built-in pedals to basic operation, such as when you've connected an external foot pedal,
you can switch the operation mode of the pedals. This lets you simplify operation by preventing the left pedal from
performing the "LOOP FX on/off" operation, and preventing the right pedal from performing the "switch the current
track" operation.
1. While holding down the [LOOP FX ON/OFF] button, turn on the power (insert a plug into
the OUTPUT L jack).
2. Use the [ ] / [ ] buttons to select the desired mode.
Display Operation of the left pedal
Pressing the left pedal twice in succession when
stopped or during playback will turn the LOOP
LC
FX on/off.
(default)
The left pedal will not turn the LOOP FX on/off.
This prevents the LOOP FX from being inadver-
--
tently turned on/off if you unintentionally press the
left pedal twice in succession.
3. Press the [LOOP FX ON/OFF] button to return to normal operation.
18
Operation of the right pedal
Holding down the right pedal for two seconds or
longer will switch the current track.
If you hold down the right pedal for less than two
seconds, playback will stop when you release the
right pedal.
The right pedal will not switch the current track.
In this case, playback will stop the instant you press
the right pedal, allowing more rapid operation.