Setting The Time Signature - Boss LOOP STATION RC-30 DUAL TRACK LOOPER Manual Del Usuario

Setting the Time Signature

You can set the time signature before you start recording.
* You can't change the time signature after recording.
1. Hold down the [RHYTHM TYPE] button
for at least two seconds.
The display will indicate "
in time signature selection mode.
2. Use the [ ] / [ ] buttons to select the
desired time signature.
Display Explanation
4/4 beat (default)
b4
b3 3/4 beat
3. Press the [RHYTHM TYPE] button to
return to normal operation.
" or " "; the RC-30 is now
b4 b3
Recording with the rhythm sound
If you record while the rhythm sound is on, recording
will start from the beginning of the measure the
instant you press the pedal to initiate recording.
By using the "Count-in recording" function (p. 11), you
can start recording after the rhythm sound has played
back for one measure.
Regardless of the timing at which you press the
pedal to end recording, the length of the phrase
will automatically be adjusted to units of one
measure.
Recording without the rhythm sound
If you record while the rhythm sound is off, the tempo
of the phrase will be automatically specified after
recording has ended.
The automatic tempo setting is calculated by assum-
ing that you have recorded "1, 2, 4, 8, 16, ... measures
in the specified time signature (p. 13). "
About Rhythm
13