Using Loop Fx; Turning Loop Fx On/Off; Specifying The Loop Fx Type; Connecting To Your Computer Via Usb - Boss LOOP STATION RC-30 DUAL TRACK LOOPER Manual Del Usuario

Using LOOP FX

You can apply an effect to the phrase playback. The effect
will be applied in synchronization with the tempo of the
phrase.
* You can't apply an effect to the sound being
recorded (i.e., you can't record the processed signal).
* The effect will be applied to both tracks 1 and 2.

Turning LOOP FX On/Off

1. Press the [LOOP FX ON/OFF] button to
turn LOOP FX on/off.
While stopped or playing, you can turn LOOP FX on/
off by pressing the left pedal twice in succession.

Connecting to Your Computer via USB

You can connect the RC-30 to your computer via a com-
mercially available USB cable, and back up RC-30 phrases
(WAV files) to your computer or load WAV files from your
computer to the RC-30.
Playable WAV file formats
Data Format
Bit Rate
Sampling Frequency
Maximum WAV file size is 1.7 GB (total of all files), maximum
time is approximately 3 hours (total of all phrases), and
minimum time is approximately 1.5 seconds.
14
WAV
16-bit linear, stereo
44.1 kHz

Specifying the LOOP FX Type

1. Press the [LOOP FX TYPE] button to
select the desired LOOP FX type.
LOOP FX Type Explanation
BEND DOWN This effect abruptly lowers the pitch.
STEP PHASER This is a phaser that changes in steps.
This is a filter whose frequency changes
SWEEP FILTER
in synchronization with the tempo.
This produces a tempo-synchronized
TEMPO DELAY
delay effect.
This effect intentionally degrades the
Lo-Fi
sound to create a distinctive character.
1. Turn on the RC-30's power (insert a plug
into the OUTPUT L jack).
* The RC-30 will not operate on USB bus power.
We recommend that you use an AC adaptor (sold
separately) to ensure that the power does not turn
off while connected via USB.
2. Use a commercially available USB cable
to connect the RC-30's USB connector
to your computer's USB connector
(a connector that supports USB 2.0
Hi-Speed).
The display will indicate "
* You can't make USB connections if the RC-30 is not
stopped, or if there is a phrase that has not been
saved.
. "
Cn