Boss LOOP STATION RC-30 DUAL TRACK LOOPER Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
Name
RHYTHM
[OUTPUT LEVEL] knob
4
[TYPE] button
[ON/OFF] button
[TAP TEMPO] button
MIC
[INPUT LEVEL] knob
5
PEAK indicator
6
POWER indicator
REC, PLAY indicator
REC (red) indicator
7
PLAY (green) indicator
Left pedal
Switches the unit between
recording/overdubbing/
playback
8
Undo/Redo
LOOP FX on/off
Right pedal
Stop
Stop all
9
Tap tempo
Switch tracks
* You can clear the track by holding down the right pedal and pressing the left pedal.
Explanation
This adjusts the volume level of the rhythm sound.
Specifies the rhythm type.
This button turns the rhythm sound on/off.
Press this button at the desired timing to set the tempo.
Adjusts the input level from the MIC IN jack. Turning the knob all the way to
the left will turn off the microphone input.
Lights when the input level exceeds the allowable level. Adjust the [INPUT
LEVEL] knob so that the PEAK indicator lights occasionally when you sing
most loudly into the microphone.
Lights when the power is on.
Lights during recording.
Lights during playback (while loading a phrase memory or performing an
internal memory operation: blinks rapidly).
During overdubbing, both the REC (red) indicator and the PLAY (green)
indicator will light.
If the phrase is empty: recording g overdubbing g playback
If the phrase contains data: playback g overdubbing
During playback or overdubbing, hold down the left pedal for two or more
seconds to undo (cancel the recording or the most recent overdubbing).
To carry out a redo, once again depress the pedal for two or more seconds
(the sound that was eliminated will be restored).
Press twice to turn LOOP FX on/off.
Stops the track currently being overdubbed or played.
Press twice to stop both tracks simultaneously.
While stopped, press the right pedal repeatedly to set the tempo to the
timing at which you pressed it.
To switch the selected track, hold down the right pedal for at least two
seconds.
Panel Descriptions
Page
p. 12
p. 6
p. 7
p. 8
p. 8
p. 11
p. 14
p. 9
p. 12
p. 8
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido