Approved Cutting Attachments; Assembling The Unit - Stihl FBD-KM Manual De Instrucciones

Approved Cutting
Attachments
1
1 Blade (4180 / 00)
FBD-KM

Assembling the Unit

Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
Mounting the Gearbox
1
2
Loosen the clamp screw (1) on the
N
gearbox (2) – do not remove it.
Push the drive tube (3) into the
N
gearbox, turning it back and forth at
the same time.
4
Once the end of the drive tube is
N
inserted beyond the slot in the
clamp (4), push it fully home as far
as stop.
Tighten down the clamp screw
N
moderately.
English
11