Approved Multiengines - Stihl FC-MM Manual De Instrucciones

1
: Always walk forwards when cutting,
do not pull the unit towards you.
: Cut at a steady pace to avoid having
to make several passes.
1 = Alignment sight for edger blade
FC-MM
Cleaning the cutting blade
Pieces of grass or roots may become
tightly wound around the tool mounting
during edging work.
Clean the blade as follows:
– Shut off the engine.
– Wear protective gloves.
– Pull the spring clip out of the shaft.
– Pull the blade off the shaft.
– Clean residue of roots, plants and
soil off the blade and mounting.
Refit the blade as described in chapter
"Mounting the MultiTool".
English / USA

Approved MultiEngines

Only MultiEngines which have been
supplied by STIHL or specially approved
for use with this MultiTool may be used.
This MultiTool may only be used in
combination with STIHL MM 55.
13