Approved Combinations Of Cutting Attachment And Deflector - Stihl FSA 65 Manual De Instrucciones

English
Working with bump guard
The bump guard comes standard with
the FSA 85. It is available as a special
accessory for the FSA 65.
1
The bump guard (1)
Limits the cutting range of the
–
mowing line
reduces the risk of the rotating
–
mowing line causing damage (e.g.
tree bark)
WARNING
The mowing head may continue to
rotate briefly after you switch off your
power tool – wait for the mowing head to
come to a standstill before adjusting the
bump guard – do not adjust it with your
foot.
Disposal
Do not throw cuttings into the
N
garbage can – they can be
composted.
12
Approved Combinations of
Cutting Attachment and
Deflector
Cutting Attachment
The trimmer comes standard with an
AutoCut C 4-2 mowing head. For safety
reasons no other cutting attachments
may be mounted to the trimmer.
For mounting procedure see chapter on
"Replacing Nylon Line".
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
WARNING
Use only the provided deflector in order
to reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
provided handle in order to reduce the
risk of injury from loss of control and
contact with the cutting attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only the provided mowing head may be
used.
FSA 65, FSA 85