Function Setting Menu - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782
To save a waveform on CH1 in address A, do the following:
1. Press the MENU key and the function menu appears at the right of the
screen.
Press the "MENU ▲" or "MENU ▼" key to select the Waveform Saving. Four
2.
items selectable are displayed at the bottom of the screen.
3. Press the F1 key to select the signal source CH1.
4. Press the F2 key to select the address A.
5. Press the F3 key to save the waveform on CH1 in address A.
To display the saved waveform on the screen, do the following:
6. Press the F4 key to select Start for the address A. The waveform saved in
address A will be displayed on the screen in green color.
The display color is green, and the zero point of waveform k, voltage and time is
purple.
Now, you can see a screen that looks like the following figure 22.
4.18

Function Setting Menu

Open the vertical menu of functions and select the SYSTEM function. The
parameters to be modified with F1∼F5 keys will appear in the lower part of the display.
The function setting menu is described in the following list:
02-2010
Figure 22.- Waveform Saving.
Page 36