Horizontal Axis Setting. Horizontal Function - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782
4.23

Horizontal axis setting. HORIZONTAL function

Open the vertical menu of functions and select the HORIZONTAL function. The
parameters to be modified with F1∼F5 keys will appear in the lower part of the display.
The time base mode menu is explained as the following table:
Function menu
Main time base
Zone Window
Window extensión
For the operation of window extension, please execute the following steps:
1. Press MENU key, display the function menu on the right side of the screen.
Press "MENU ▲" or "MENU ▼" key to select time base mode, display three
2.
options at the bottom.
3. Press F2 key to select window setting.
4. Press OSC OPTION key, pop up TIME BASE, at this time, then press OSC
◄/OSC ► key to adjust the time base window area defined by two cursors,
the window size will vary.
Press OSC OPTION, key and call OSC ◄ / OSC ► to adjust the window
5.
position defined by two cursors, the window position is the time difference of
the window center to main time base's horizontal pointer.
6. Press F3 key, select window extension, the defined window extends into the
full-screen display.
The screen that looks like the following figure 27, 28 will be displayed.
02-2010
Setting Explanation
Horizontal main time base is used to wave display
Use two cursors to define a window area
Expand the defined window to full-screen display
Page 46