Making A Dc Voltage Measurement (Vdc); Making A Ac Voltage Measurement (Vac) - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782

5.4.5 Making a DC voltage Measurement (VDC)

To measure a DC voltage, do the following:
1. Press the V key and DCV appears at the top of the screen.
2. Insert the black lead into the COM banana jack input and the red lead into the
V/Ω banana jack input.
3. Connect the red and black leads to the measured point and the measured
point voltage value is displayed on the screen. Now, you can see a screen
that looks like the following Figure 38.

5.4.6 Making a AC voltage Measurement (VAC)

To measure the AC voltage, do the following:
1. Press the V key and DCV appears at the top of the screen.
2. Press the AUTO SET key and ACV appears at the top of the screen.
3. Insert the black lead into the COM banana jack input and the red lead into the
V/ / Ω banana jack input.
4. Connect the red and black leads to the measured points and the AC voltage
values of measured points will be displayed on the screen.
02-2010
Figure 38.- DC voltage Measurement
Page 54