USER'S MANUAL. OS-782
5.6
Taking a relative measurement
A currently measured result relative to the defined reference value is displayed in
a relative measurement.
The following example shows how to take a relative measurement. At first, it is
required to acquire a reference value.
1.
Press R key and R is displayed on the top side of the screen.
2.
Press the AUTO SET key till C appears at the top of the screen.
3.
Plug capacitance extended module in capacitance measure jack.
4.
When the reading leveling off, press F2 key and
top side of the screen. The saved reference value is displayed below
5.
Plug capacitance, the displayed major reading on the screen is actual the
capacitance value.
Look at the display, you can see a screen that looks like the following figure
32.
Page 59
Figure 44: Freezing the Readings.
is displayed on the
.
02-2010