Freezing The Readings - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782
4. Plug current extended module in current measure jack, then plug the probe in
the module.
5. Connect the red and black leads to the measured point and the AC current
value of the measured point will be displayed on the screen.
6. Press F4 return to 400mA measure.
5.5

Freezing the Readings.

You can freeze the displayed readings at any time.
1. Press the RUN /STOP key to freeze the screen and STOP will be displayed at
the top right of the screen.
2. Again, press the RUN /STOP key, you can resume your measurement.
Look at the display; you can see a screen that looks like the following figure 40.
02-2010
Figure 43.- AC current Measurement for 20A.
Page 58