Preparing; Preparing The Camcorder - Sony MPK-DVF Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparing

1

Preparing the camcorder

The DCR-TRV9E is the model used for illustration purposes. Otherwise, the model
name is indicated in the illustrations. Any differences in operation are clearly indicated
in the text, for example, "DCR-TRV9E only".
For details, please refer to the operating instructions supplied with your camcorder.
(1) Remove the lens cap, shoulder strap, conversion lens or filter from the
camcorder.
(2) Attach a charged battery pack.
(3) Insert a cassette tape.
(4) For DCR-TRV7E and DCR-TRV9E, attach the reflex prevention ring to the tip of
the lens.
(5) Attach the camera mounting shoe A (for DCR-TRV7E) or the camera mounting
shoe B* (for DCR-TRV9E/TRV890E/TRV900E).
Remove the metal part from the camera mounting shoe B and fasten the screw.
For DCR-TRV9E/TRV890E/TRV900E only, connect the A/V connecting cable of
the camera mounting shoe B to the camcorder's AUDIO/VIDEO jack.
(6) Adjust the camcorder.
(7) For DCR-TRV9E/TRV890E/TRV900E only, cancel the following functions:
BACK LIGHT, NightShot, PROGRAM AE and picture effect.
* To attach the camera mounting shoe B
Attach the screw plate to the camera mounting shoe B.
Installing positon of the screw plate
1
DCR-TRV9E
2
DCR-TRV890E/TRV900E
EN
F
ES
7
-EN

Publicidad

Tabla de contenido
loading

Tabla de contenido