Preparing The Marine Pack (Installing The Battery) - Sony MPK-DVF6 Manual De Instrucciones

Preparations (continued)

Preparing the marine pack (installing the battery)

1
Remove the grip.
Undo the screw on the bottom side
of the marine pack.
2
Insert the lithium battery into the grip.
1 Remove the screw with the
2 Insert the supplied lithium
3 Fasten the screw tightly.
3
Unfasten the 3 latches and open
the marine pack.
If you lift the metal part in the
direction of the finder when the
latches are open, the latches will
stop.
12
-GB
supplied screw driver.
battery (CR2, × 1) with the
polarity positioned correctly as
indicated on the grip.