Metz mecablitz 52 AF-1 Manual De Instrucciones página 158

• Press the
EV
touch display and select "Zoom".
ZOOM
• Press the
touch display.
50
• Press the
70
touch display and select the desired zoom
85
value.
After around 10 seconds, the operation
display appears, or press the
repeatedly until the operation display
appears. The following zoom positions are
possible for the reflector: 24 - 28 - 35 - 50 -
70 - 85 - 105 mm (35 mm format).
Tip:
If you do not necessarily need the full guide
k
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens. This will provide full light
coverage of the picture and eliminate the
need to continually adjust it to the focal
length of the lens.
Example :
You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.
158
sensor buttons on the
Zoom
sensor button on the
sensor buttons on the
D
button
Resetting to auto-zoom
• Touch the shutter release to begin a data
transfer between the flash unit and the
camera.
D
• Press the
for the selection menu to appear.
• Press the
touch display.
EV
• Press the
ZOOM
touch display and select "Zoom".
• Press the
touch display.
A.Zoom
• Press the
24
display and select
After around 10 seconds, the operation
display appears, or press the
repeatedly until the operation display
appears.
button as often as it takes
PARA
sensor button on the
sensor buttons on the
Zoom
sensor button on the
sensor buttons on the touch
A.Zoom
.
D
button