Connecting Speakers - Yamaha DRX-730 Manual De Instrucciones

Connecting speakers

Connect the NX-E700 speakers to the DRX-730 as shown below.
Right speaker
MAINS
R
6
SPEAKERS
(Europe model shown here.)
Notes:
• Do not connect the power cable to the DRX-730
until all other connections have been completed.
• Be sure to connect the right speaker to the
terminals labelled "R, " and the left speaker to the
terminals labelled "L".
• Make sure the exposed strands of each wire are
not touching any other wires or any metal parts of
the DRX-730, as this could seriously damage the
DRX-730 and your speakers.
• Do not connect speakers with an impedance
lower than the minimum impedance stated on the
rear of the DRX-730.
Speaker cables
DRX-730
HDMI
MIN SPEAKER
SUBWOOFER OUT IN
OUT AUX
AV MONITOR OUT
P P
R B
Y
R
VIDEO COMPONENT
OPTICAL
DOCK VIDEO OUT DIGITAL
• Use magnetically shielded speakers if you intend
to position them close to a CRT-type TV. If they
cause picture interference, move them away from
the TV.
Chapter 2: Getting Started
Left speaker
AM
ANT
GND
FM
ANT
75
UNBAL.
OUT
9
2
En