Starting And Stopping; Before Starting; Starting; Stopping - Husqvarna WCV 180 Manual De Instrucciones

Before starting

WARNING! The machine should be
!
connected to an earthed outlet socket.
Check that the mains voltage
corresponds with that stated on the
rating plate on the machine.
Carelessness can result in serious
personal injury or even death.
• Prevent unintentional starting. Ensure the switch is in
the OFF-position before connecting to power source.
• Check that the machine's safety features are intact.
• Check that the machine and its parts are correctly
assembled and not damaged in any way.
• Check the blade's direction of rotation.
• Connect the vacuum cleaner to the machine.

Starting

• First press the power switch on the right handle (1)
and then the power switch on the left handle (2).
• Once maximum speed is acquired, lower the blades
to the required cutting depth.

Stopping

• Stop the machine by releasing any of the power
switches. Make sure the blades have stopped rotating
before you lift the machine off the workpiece.

STARTING AND STOPPING

–
English 11