To Clean The Product; To Clean The Radiator - Husqvarna FS 4600 G II Manual De Usuario

Maintenance
Do a check of the pump belt for the hydraulic propulsion sys-
tem.
Do a check of the engine belt.
Do a check of the drive belts.
Lubricate the pivot on the hydraulic cylinder.
Lubricate the front wheels.
Lubricate the bearings on the front axle.
Lubricate the bearings on the rear axle.
Do a check of all fittings and nut bolts. Make sure that they
are installed correctly.
Do a check of the inner blade flange, the outer blade flange
and the blade nut.
Replace the fuel filter.
Do a check of the hydraulic oil level for the drive system.
Do a check of the hydraulic oil level for the hydraulic lift
pump.
Do a check of the gearbox oil level.
Do a check of the rear axle oil level.
Examine the wheels and wheel hubs for damage and make
sure that they are installed correctly.
Examine the air filter hose and hose clamps.
Replace the oil of the drive system.
Replace the oil of the hydraulic lift pump.
Replace the rear axle oil.
Replace the gearbox oil.
Replace the radiator coolant.
Replace the air filters.
Do a check that the coolant mixture is correct. Refer to
nical data on page 48 .

To clean the product

WARNING:
When you clean with a high-pressure
washer, dirt and harmful material can eject
from the product.
• Let the product become cool before you clean it.
• Make sure that the cover for the relay and fuse box
is correctly installed before you clean the product.
• Do not clean electrical components with water.
28
Use protective glasses.
Daily 50 h
X
X
X
X
X
X
X
X
X
Tech-
• Use a weak cleaning agent. Put on protective gloves
to prevent skin irritation.
• Use a high-pressure washer to clean the product.

To clean the radiator

CAUTION:
Incorrect procedure can cause damage to
the cooling fins.
• Use compressed air to clean the cooling fins.
100 h 250 h 500 h
X
X
X
X
X
X
X
X
X
X
X
X
X
Obey the instructions.
1657 - 001 - 08.09.2021
Yearly
X