Safety Devices On The Product; Safety Instructions For Maintenance - Husqvarna PG 690 Propane Manual Del Usuario

• Only use the batteries that we recommend for your
product.
• Use only original batteries for this product. There is a
risk of explosion if the batteries are replaced with a
battery of incorrect type. Speak to your dealer for
more information.
• Use batteries that are rechargable as a power supply
for the related Husqvarna products only. To prevent
injury, do not use the battery as a power supply for
other devices.
• Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
• If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and get
medical aid.
• Do not use batteries that are non-rechargable.
• Do not do modifications to the battery.
• Do not put objects into the air slots of the battery.
• Keep the battery away from sunlight, heat or open
flame. The battery can cause an explosion and
cause burns and/or chemical burns.
• Keep the battery away from rain and wet conditions.
• Keep the battery away from microwaves and high
pressure.
• Do not try to disassemble or break the battery.
• Use the battery in temperatures between -10 °C/14
°F and 40 °C/104 °F.
• Do not clean the battery with water. Refer to
clean the battery on page 21 .
• Do not use a defective or damaged battery.
• Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
• Keep the battery away from children.

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
10
Emergency stop button
The emergency stop button is used to quickly stop the
engine. The emergency stop button breaks the mains
power supply.
To do a check of the emergency stop button
1. Turn the emergency stop button on the control panel
clockwise to make sure that the emergency stop
To
button is disengaged.
2. Start the engine. Refer to
page 16 .
3. Push the emergency stop button.
4. Turn the emergency stop button clockwise to
disengage.

Safety instructions for maintenance

• Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
• Do not use a product that is defective. Do the safety
checks, maintenance and the servicing as given in
CAUTION: Do not use the emergency stop
button as the stop button for the product.
To start the product on
1212 - 003 - 25.05.2020