Adjusting The Telescoping Shaft; Fitting The Harness - Stihl HT 102 Manual De Instrucciones

Adjusting the Telescoping
Shaft
WARNING
Always shut off the engine and fit the
chain guard
Loosen the clamp nut half a turn
N
counterclockwise.
Adjust shaft to the required length.
N
Tighten down the clamp nut firmly.
N
HT 102, HT 103, HT 132, HT 133

Fitting the Harness

The type and style of the shoulder strap
depend on the market.
Shoulder strap (HT 102, HT 132)
2
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
N
carabiner (2) must be at about the
same height as your right hip.
Shoulder strap (HT 103, HT 133)
1
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
N
carabiner (2) must be at about the
same height as your right hip.
English
1
2
25