Date And Time Setting; Auto On-Off Setting - Bezzera MATRIX Manual De Instrucciones

BEZZERA MATRIX-DUO
MOD.
Warnings: verify that the hydraulic connections
are correct for the source chosen .
5.14 Data and time setting
To set the date and time of the machine it is nec-
essary to:
1) Open the drop-down menu.
2) Access the settings screen by entering the pass-
word (if any).
1
3) Scroll through the settings with the side arrows
until reaching "date and time".
4) Touch the relevant icon and access the date
and time setting screen.
2

5.15 Auto on-off setting

To set the date and time for turning of the ma-
chine on and off, it is necessary to:
1) Open the drop-down menu.
2) Access the settings screen by entering the
password (if any).
1
3) Scroll through the settings with the side arrows
until reaching "auto on off".
4) Tap on the icon to the right of the bar to acti-
vate or deactivate the setting.
5) Touch the left side of the bar to access the day
by day setting screen.
It is possible to synchronise the switching on and
off times, making them the same for all the days
of the week by touching the word "synchronise" in
the bottom left.
Note: to set the machine to operate and to be
kept at temperature 24 hours a day, simply set the
same switch-on and switch-off time.
52
2