White Led Lights (De - Duo Versions); Tank Sensor Calibration - Bezzera MATRIX Manual De Instrucciones

BEZZERA MATRIX-DUO
MOD.
5.11 White LED lights (DE - DUO ver-
sions)
For machines equipped with LED lighting for the
cup rest and/or rear Bezzera logo panel, it is pos-
sible to adjust the brightness or to switch off the
lighting completely, using the appropriate screen
function. To access the function:
1) Open the drop-down menu.
2) Access the settings screen by entering the pass-
word (if any).
1
3) Scroll with the side arrows until reaching the
Lights item, tap on
will appear, it will signal that the lights are on.
4) To adjust the brightness, tap on the word Lights
and then adjust the brightness with
2
to turnon the lights,

5.12 Tank sensor calibration

Warnings: do not insert water into the tank before
calibration, ignoring the error screen that will ap-
pear as soon as the machine is started.
The Matrix and Duo machines are supplied pre-
set to tank. To use the machine in the default
mode, it is advisable to calibrate the tank sensor.
Proceed as follows to calibrate the tank sensor:
1) Open the drop-down menu.
2) Access the settings screen by entering the pass-
word (if any).
and .
50
1
2