Important Safety Instructions - Hofmann geodyna 7400 Manual Del Operador

IMPORTANT SAFETY INSTRUCTIONS

When using this equipment, basic safety precautions should always be followed, in-
cluding the following:
1. Read all instructions.
2. Do not operate equipment with a damaged power cord or if the equipment has been
damaged - until it has been examined by a qualifi ed authorized service technician.
3. If an extension cord is used, a cord with a current rating equal to or more than that of
the machine should be used. Cords rated for less current than the equip- ment may
overheat. Care should be taken to arrange the cord so that it will not be tripped over
or pulled.
4. Always unplug equipment from electrical outlet when not in use. Never use the cord
to pull the plug from the outlet. Grasp plug and pull to disconnect.
5. To reduce the risk of fi re, do not operate equipment in the vicinity of open containers
of fl ammable liquids (gasoline).
6. Keep hair, loose fi tting clothing, fi ngers and all parts of the body away from moving
parts.
7. Adequate ventilation should be provided when working on operating internal combu-
stion engines.
8. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
9. Do not hammer on or hit any part of the control panel with weight pliers.
10. Do not allow unauthorized personnel to operate the equipment.
11. Do not disable the hood safety interlock system or bypass the intended operation.
12. Use only as described in this manual. Use only manufacturer's recommended attachments.
13. Always securely tighten the Ring-Nut before Spinning the shaft.
14. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
15. Balancer is for indoor use only.
SAVE THESE INSTRUCTIONS
geodyna 7400L
iii