If The Top Tire Bead Is Diffi Cult To Mount - Hofmann monty 1620 Manual Del Operador

5.2.1-1
5.2.1-2
36
monty 1620 - 1625
5.2-4
5.2.1 If the top tire bead is diffi cult to mount
Option 1)
Use the Bead Assist optional accessory, (MH310PRO).
Follow the separate instruction provided.
Option 2)
Follow these instructions using the optional bead
clamp MX (Fig. 5.2-4), #EAA0247G70A.
A. After installing, the bottom bead insert the
tire tool to the left of the bead head as shown
(Fig. 5.2.1-1). To protect decorative rims use
protective sleeve p/n 0024180 (optional).
B. Step on the foot pedal to rotate the turntable
clockwise until the tire lever is tight against the
bead head (Fig. 5.2.1-1).
C. Using your right hand push and hold the tire
bead opposite the bead head into the rim drop
centre.
D. Position the bead clamp MX #EAA0247G70A
(optional) to hold the tire bead into the rim drop
centre (Fig. 5.2.4).
E. As the turntable is turning use the tire tool in
your left hand to raise and guide the tire bead
onto the bead head (Fig. 5.2.1-2).
F. Continue to rotate the turntable until the top
bead is mounted.
Do not remove the tire tool or bead clamp until the foot
pedal is released.
Operator's Manual