Care And Cleaning; Disposal - arjo Skin IQ 1000 Instrucciones De Uso

CARE AND CLEANING

During patient use, clean Skin IQ 1000 Coverlet by wiping with a mild soap and water solution. Do not launder
the Skin IQ 1000 Coverlet. The Skin IQ 1000 Coverlet is for single patient
use only.
Avoid spilling fluids on any part of the Skin IQ 1000 power supply. If spills do occur:
•
disconnect the power cord from the wall outlet
•
clean fluids from the product
Ensure that there is no moisture in or near the power supply and power plug
before reconnecting the power cord.

DISPOSAL

The coverlet itself is a single patient use only product, but some of the items that come with it
can be reused if they are handled properly when removed. Follow the steps below to remove
the fan and dispose of all components of the
1. Disconnect power cord from wall outlet.
Disconnect power supply from fan.
2.
Power supply and cord can be reused. Consider all facility policies and procedures
with regard to cleaning, inspection and reuse of electronic equipment. If not
reused, dispose of power supply per approved local institutional procedures.
3. Cut fan out of coverlet as shown.
4. Dispose of coverlet and fan according to approved
local institutional procedures.
Fan assembly contains electronic components
that may require alternate disposal than the
soft goods of the coverlet.
Improper disposal of any component may
result in regulatory non-compliance.
Skin IQ 1000 MCM
.
EN
9