Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4
18
11
20
19
9
2
17
21
10
11
25
23
15
17
29
23
22
34
37
35
36
28
The machine can be used in the following work modes:
•
ECO-MODE, read the section "ECO-MODE";
•
MANUAL MODE, read the section
•
PROGRAM ZONE, read the section
As an example, we will look at the program mode. To begin working in this mode, proceed as follows:
1. Make all the checks listed in
2. Go to the driving position, behind the machine.
3. Turn on the machine and turn the key (1) a quarter turn clockwise (Fig.1).
4. When the display comes on, three screens appear in sequence:
•
The first screen displayed indicates the logo of the manufacturer of the machine.
•
The second screen displayed indicates the name of the machine.
•
The third screen displayed (Fig.2) indicates the characteristics of the machine's programming.
•
The forth screen displays (Fig.3) identifies the work panel.
5. Select the desired work area, press one of the three "ZONE" buttons (2) on the control panel (see
N.B.: When the machine is switched on with the "TRANSFER" working program active, pressing one of the "ZONE" keys (2) automatically
activates the "SCRUBBING WITHOUT DRYING" program.
STARTING WORK
16
13
3
12
8
19
7
3s.
12
25
26
27
18
30
24
39
38
29
30
"MANUAL
MODE",
"PROGRAM ZONE
MODE".
"PREPARING TO
WORK".
2
6
5
1
14
22
9
7
22
1
13
28
26
19
31
32
25
19
3
4
1
5
6
3
15
8
9
24
23
14
15
20
21
33
26
27
"PROGRAM ZONE
MODE") (Fig.4).
Publicidad
Capítulos
Tabla de contenido
