RECOMMENDED MAINTENANCE OPERATIONS
1
2
1
2
9
8
7
8
13
14
13
20
19
20
INTERVAL
MACHINE COMPONENTS
Squeegee
Debris hopper
Brush head brushes
Recovery tank
Solution tank
Machine water system
Squeegee rubber blades
Brush head brushes
MONTHLY
Squeegee rubber blade levelling
3
4
5
3
4
10
11
9
10
18
15
17
16
14
15
16
21
Clean the vacuum chamber; the squeegee rubber blades; the vacuum nozzle
(see
"CLEANING THE SQUEEGEE
Empty the debris hopper and clean inside (see
HOPPER (SWEEPING
Clean the brushes on the brush head body (see
BODY BRUSHES (SCRUBBING
Clean the brushes on the brush head body (see
BODY BRUSHES (SWEEPING
At the end of every working day, empty the recovery tank (see
RECOVERY
TANK").
At the end of every working day, after having emptied the recovery tank, clean the
vacuum system filters (see
At the end of every working day, after having emptied the recovery tank, clean the
vacuum tube (see
"CLEANING THE VACUUM
At the end of every working day, empty the solution tank (see
SOLUTION
TANK").
Clean the filter in the machine's water system (see
SYSTEM
FILTER").
Check that the rubber blades on the squeegee body are intact and inspect for
wear; if necessary, replace these (see
RUBBER
BLADES").
Check that the brushes on the brush head body are intact and inspect for wear;
if necessary, replace these (see
BRUSHES (SCRUBBING
Check that the brushes on the brush head body are intact and inspect for wear;
if necessary, replace these (see
BRUSHES (SWEEPING
Check that the rubber blades on the squeegee body are level and if necessary,
adjust these (see
"ADJUSTING THE SQUEEGEE BODY RUBBER
26
6
5
11
11
17
PROCEDURE
BODY").
"CLEANING THE DEBRIS
VERSION)").
"CLEANING THE BRUSH HEAD
VERSION)").
"CLEANING THE BRUSH HEAD
VERSION)").
"CLEANING THE RECOVERY TANK
TUBE").
"CLEANING THE WATER
"REPLACING THE SQUEEGEE BODY
"REPLACING THE BRUSH HEAD BODY
VERSION)".
"REPLACING THE BRUSH HEAD BODY
VERSION)".
7
6
12
12
19
18
"EMPTYING THE
FILTERS").
"EMPTYING THE
BLADES").