Information On 'Field-Adjustable Trip Points' And 'Advanced Grid Features; Fcc / Rss Compliance; Insulation Monitoring - Fronius Primo 208-240 3.8-1 Manual De Instrucciones

The manufacturer is not responsible for any damage resulting from improper use.
All warranty claims are considered void in such cases.
Proper use also means
-
-
-
When configuring the photovoltaic system, make sure that all photovoltaic system compo-
nents are operating completely within their permitted operating range.
All measures recommended by the solar module manufacturer for maintaining solar mod-
ule properties must be followed.
Utility company regulations regarding grid power feed must be followed.
Information on The inverter is equipped with 'Field adjustable trip points' and 'Advanced Grid Features'.
'Field-adjustable For further information, please contact 'Fronius Technical Support' at the following email
trip points' and address: pv-support-usa@fronius.com.
'Advanced Grid
Features'
FCC / RSS Com-
pliance
Insulation Moni- The inverter is fitted with the following safety function as required by UL 1741 and the Na-
toring tional Electrical Code:
10
carefully reading and obeying all the instructions and safety and danger notices in the
operating instructions
carrying out all the specified inspection and servicing work
installation as per operating instructions.
FCC
This device corresponds to the limit values for a digital device of class B in
accordance with Part 15 of the FCC regulations. The limit values should pro-
vide adequate protection against harmful interference in homes. This device
creates and uses high frequency energy and can interfere with radio com-
munications when not used in accordance with the instructions. However,
there is no guarantee against interference occurring in a particular installa-
tion.
If this device interferes with radio or television reception when turning the de-
vice on and off, it is recommended that the user solve this with one or more
of the following measures:
- adjust or reposition the receiving antenna
- increase the distance between the device and the receiver
- connect the device to another circuit, which does not include the receiv-
er
- for further support, please contact the retailer or an experienced radio/
TV technician.
Industry Canada RSS
The device corresponds to the license-free Industry Canada RSS stan-
dards. Operation is subject to the following conditions:
(1) The device may not cause harmful interference
(2) The device must accept any interference received, including interfer-
ence that may cause undesired operation.