General Menu Item Settings - Fronius Primo 208-240 3.8-1 Manual De Instrucciones

If no key is pressed for 2 minutes
-
-
-
General Menu
1
Item Settings
2
3
The available settings are displayed:
The currently selected entry is displayed.
24
G R A P H
the inverter switches to the "NOW" menu item from anywhere within the menu level
(exception: Setup menu item "Standby")
the display illumination turns off
the current power of feeding in is displayed.
Access the desired menu
Use the 'Up' and 'Down' keys to select the desired entry
Press the "Enter" key
Use the 'Up' and 'Down' keys to se-
4
lect the desired setting
Press the 'Enter' key to save and ap-
5
ply the selection.
Press the 'Esc' key to exit without
saving.
To exit a menu item, press the "Back"
4
key
The menu level is displayed
The first digit of a value to be set flash-
es:
Use the "Up" and "Down" keys to se-
4
lect a value for the first digit
Press the "Enter" key
5
The second digit of the value flashes.
Repeat steps 4 and 5 until...
6
the entire value flashes.
Press the "Enter" key
7
Repeat steps 4 - 6 for units or other
8
values to be set until the unit or value
flashes.
Press the 'Enter' key to save and ap-
9
ply the changes.
Press the 'Esc' key to exit without
saving.
The currently selected entry is displayed.