Keys And Symbols - Fronius Primo 208-240 3.8-1 Manual De Instrucciones

Keys and symbols

Keys and Sym-
bols
Item
(1)
Control and Status LEDs
(2)
(3)
(4)
Function keys – each has a different function depending on the selection:
(5)
(6)
(7)
(8)
18
(1)
(2)
(3)
(4)
(5)
Description
LC-Display
for displaying values, settings, and menus
General Status LED (red)
indicates
- when a status code is shown on the display
- interruption of grid power feed operation
- during troubleshooting (the inverter is waiting to be reset or for an error to
be corrected).
Startup LED (orange)
indicates
- the inverter will enter the automatic startup or self test phase (as soon as
the solar modules yield sufficient power output after sunrise)
- the inverter has been set to standby operation in the Setup menu (= man-
ual shutoff of operation)
- the inverter software is being updated.
Operating Status LED (green)
indicates
- the photovoltaic system is working fault-free following the automatic startup
phase of the inverter
- the grid power feed operation is taking place.
"Left/Up" key
for navigating left and up
"Down/Right" key
for navigating down and right
"Menu/Esc" key
for switching to the menu level
to exit the Setup menu
"Enter" key
for confirming a selection
(6) (7) (8)