Application Example: Setting The Feed-In Tariff - Fronius Primo 208-240 3.8-1 Manual De Instrucciones

Application Ex-
ample: Setting
the Feed-In Tariff
Select the 'Energy yield' setup menu entry
1
Press the 'Enter' key
2
The overview of adjustable values is displayed.
Use the 'up' or 'down' keys
3
the 'Feed-in tariff'
Press the 'Enter' key
4
The feed-in tariff is displayed
The tens digits flashes.
Use the 'plus' or 'minus' keys
5
a value for the tens digit
Press the 'Enter' key
6
The units position flashes.
Repeat steps 5 and 6 for the units position
7
and the 3 decimal places until ...
The set feed-in tariff flashes.
Press the 'Enter' key
8
The feed-in tariff is applied and the overview of
adjustable values is displayed.
Press the 'Esc'
9
The 'Energy yield' setup menu entry is displayed.
to select
to select
25