Connecting Your TV
Connect the video input jack of your TV to
the VIDEO OUT jack on the unit, using the
supplied video cord.
When connecting a video deck
Connect the TV and the video deck using
video and audio cords (not supplied) as
shown below.
TV
Video deck
Do not connect directly.
If you connect a video deck between this
system and the TV, you may experience
video leakage when watching the video
signal from this system. Do not connect a
video deck between this system and TV.
Setting Up the Color
System
Change the color system if necessary from
[PAL] or [NTSC] after connecting your TV. The
factory default for the color system is [PAL]
on models for Europe, Russia, Oceania,
China, Africa and Middle East, and [NTSC] for
other models. Note that the color system
setup function is not available for North
American and Latin American models
(except for Argentine model).
1
2
Unit
3
4
5
Press / to turn on the
system.
Press SETUP in DVD/CD
function.
The setup menu appears on the TV
screen.
Selected category
Selected setup item
Setup categories
Press / to select [SCREEN]
settings, then press
Press / to select [TV
System], then press
Press / to select [PAL] or
[NTSC], then press
Press SETUP to turn off the setup menu.
Options
.
.
.
11
GB