Hofmann geodyna 7100 Manual De Operador página 88

88
6-4
6-5
6-6
6-7
6-8
6-9
Trouble shooting
E89
A key is jammed.
Find and release jammed key.
Or:
Press STOP or ESC to check the pedal switch.
If the error cannot be eliminated, the pedal function
is switched off by pressing the STOP key or the ESC
key. Call service team.
E92
The gauge for measuring the distance and diameter
is faulty.
Call service team.
As long as the geodata measuring gauge is defective,
set the distance and rim dimensions using the menu
key and turning the wheel (Chapter 2.3.3).
H0 - Figure 6-4
Wheel silent running cannot be improved with
balancing optimisation.
H1 - Figure 6-5
Further optimisation is not recommended but is
possible.
H2 - Figure 6-6
Weight minimisation is recommended, further
optimisation does not bring improvements.
H20 - Figure 6-7
Correction plane cannot be found with the gauge for
measuring distance and diameter.
Measure the correction plane and set the dynamic
imbalance indicator.
H21 - Figure 6-8
The position reached does not correspond to the
correction plane, in which the stick-on weight must be
applied with the gauge.
Turn the wheel to the position for application of the
stick-on weight on the relative correction plane.
H26 -Figure 6-9
The gauge was moved too quickly.
Return the gauge at the starting position and repeat
the operation, making the gauge approach the weight
application point moreslowly.