Connecting The Dock Cable - Yamaha YBA-10 Manual De Instrucciones

■ Connecting the dock cable

1 Connect one of the plugs of the dock
cable to the dock cable terminal of this
unit firmly.
2 Make sure the power of the YBA-10
compatible component (AV receiver,
etc.) is turned off.
2
En
3 Connect the other plug of the dock
Connect the
plug with the
side with the
release
button facing
upward.
Notes
• Be sure to connect the plugs of the dock cable
• The YBA-10 is not compatible with all AV
cable to the DOCK terminal of the
YBA-10 compatible component (AV
receiver, etc.).
DOCK
firmly to both the dock cable terminal of this
unit and the DOCK terminal of theYBA-10
compatible component (AV receiver, etc.).
When the connection is loose, this unit may
output some unwanted noise.
receivers or other components, even those
equipped with DOCK terminals. For details, see
the owner's manual of your DOCK terminal-
equipped components.