Controlling Zones 2- 4 From The Main Room; Controlling Zones 2 - 4 From Remote Locations; Usb/Ipod Operation; Usb Storage Device Connection - Rotel RSP-1572 Manual De Instrucciones

English

Controlling Zones 2- 4 from the Main Room

You can control Zones 2 - 4 from the main room using front panel or
remote control buttons to activate or deactivate Zones 2 - 4, change
input sources, and adjust the volume. Controlling Zone 2, 3 or 4
from the main room is accomplished by pressing the SEL button on
the front panel or remote two or more times, putting the RSP-1572 in
Zone 2, 3 or 4 control mode temporarily. When Zone 2, 3 or 4 status
is displayed, the OSD and/or front-panel displays show the current
source selection and volume in that zone for ten seconds, during which
time you can use the front panel VOLUME control and INPUT buttons
to change the ZONE 2, 3 or 4 settings.
To turn Zone 2, 3 or 4 on or off:
1. Press the SEL button repeatedly until the desired zone status appears
in the OSD and front panel displays.
2. Within 10 seconds, press the front panel ZONE button to toggle the
selected Zone on or off.
3. Following 10 seconds with no commands, the unit reverts to normal
operation.
To change the Zone 2, 3 or 4 input source:
1. Press the front panel SEL or remote repeatedly until the desired zone
status appears in the OSD and front panel displays.
2. Within 10 seconds, press one of the INPUT buttons to select a new
source for the selected zone. The name of the selected source appears
in the display. Instead of pressing an INPUT button, you can also push
the navigation buttons on the remote to step through the inputs.
3. Following 10 seconds with no commands, the unit reverts to normal
operation.
To change Zone 2, 3 or 4 volume:
1. Press the front panel SEL or remote repeatedly until the desired zone
status appears in the OSD and front panel displays.
2. Within 10 seconds, adjust the volume control on the front panel
or remote to change the output level for the selected zone. The new
setting appears in the display.
3. Following 10 seconds with no commands, the unit reverts to normal
operation.

Controlling Zones 2 - 4 from Remote Locations

With a properly configured IR repeater system, you have full control of
Zones 2-4 using the supplied remote control, from the zone locations.
You can select and operate a source, adjust the volume, and turn
the relevant Zone on or off. Whatever commands you send from the
remote control will change ONLY the Zone for the location you are in,
just as if you were controlling a totally independent audio system in
that room. These changes will not affect the main listening room.
To turn the Zone on or off, press ON/OFF buttons on the remote.
To adjust the volume in the Zone, press the VOLUME buttons on the
remote. To select a different analog input source, press one of the
INPUT buttons on the remote or front panel.
All OFF command: A long press of the OFF button (more than 3
seconds) from any room, sets all rooms to standby, i.e. the unit goes to
standby completely.
Note: The volume adjustment is only available if the Zone 2 - 4
outputs are configured to use VARIABLE levels. With FIXED levels, the
volume control for Zones 2 - 4 is disabled.

USB/iPod operation

USB Storage Device Connection

1. Plug your USB storage device containing music files, or through a USB
adaptor into the front panel's USB socket.
2. Press USB button on the remote to enter iPod/USB mode. The unit will
automatically search music file from the root directory. Once the directory
is found, press PLAY and the unit will start playing. The display shows
song's information, such as name, time, total tracks.:
3. If your music files are in sub directories, use ENT, Up/Down button
on the remote to move to the directory, left/right button to return/enter
the directory. Press ENT button to start playing.
4. Use the numeric keys on the remote to skip to a specific track number.
Press PLAY to start playback.

iPod/iPhone Connection

4
1. Apple's iPod/iPhone can be connected via the iPod's USB cable to
the USB front socket.
2. The iPod/iPhone will send a digital music signal to the unit. All
operations can be made from the iPod/iPhone. Only simple commands
can be made through the Rotel unit as explained below.
3. The iPod/iPhone screen will remain active while connected to the unit.
If no operations are made from the iPod/iPhone for an extended period,
the screen will turn to "charging".

PlayBack Control Buttons

L
1. Use the PLAY / button to start playback.
2. Use the STOP . button to stop playback.
3. Use the PLAY //PAUSE , button to either pause a currently playing
track or to restart a currently paused track or to restart a stopped track.
4. Use the BACK TRACK buttons { to start playback of the previous
track in the list.
4. Use the FORWARD TRACK button } to start playback of the next
track in the list.
5. Push and hold the STOP . button for 5 seconds to safely remove the
USB device from the unit.
4
33