Servo Mode; Setting Servo Flash Mode; Pre-Flash Suppression Or Synchronisation Settings - Metz 64 AF-1 digital Manual De Instrucciones

10.4 SERVO mode

SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers a
flash as soon as the camera flash unit recei-
ves a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.

10.4.1 Setting SERVO flash mode

TTL
• Press the sensor button of the displayed
mode of operation on the touch display as
0.8- 9.0 m
many times as it takes for the display for
M-
5,6 selecting the mode of operation to appear.
m
35
Zoom F
m
EV
O
MODE
• Press the
touch display and select
REMOTE SLAVE
SERVO
p
q
• Press the
touch display.
SYNC
M-Servo
The mode of operation is adopted.
M-
If desired, partial light output can be set,
m
Zoom 24
m
see 10.4.3.
P
1/1
sensor buttons on the
SERVO
.
SERVO
sensor button on the
10.4.2 Pre-flash suppression or
synchronisation settings
SYNC
M-Servo
• Press the sensor button
display as many times as it takes for the
M-
display for selecting the type of synchroni-
m
Zoom 24
m
sation.
P
1/1
• Press the sensor button on the touch
display:
O
SYNC
synchronisation without pre-flash
The synchronisation of operation is adop-
ted.
LEARN
If the synchronisation set here does not work
properly, then proceed as described in
10.4.4.
SYNC
on the touch
synchronisation with pre-flash
k
171