WEG DBW03 Serie Manual Del Usuario página 28

Installation and Connection
N2:
synchronism
input
N3:
synchronism
output
N2:
synchronism
input
N3:
synchronism
output
N2:
synchronism
input
N3:
synchronism
output
Figure 3.11: Example of a simplified wiring diagram of the DBW03 as master and slave
In figure 3.11 is a master and slave wiring diagram of the DBW03. The synchronism
output N3 of the master must be connected to the synchronism input N2 of the slave.
If there is more than one slave, the synchronism output of one of the slaves must be
connected to the synchronism input of the following slave and so on.
28 | DBW03