Safety Instructions
1 SAFETY INSTRUCTIONS
This manual contains information necessary for the correct use of the dynamic
braking module.
Only trained and qualified personnel should attempt to install, start-up, and
troubleshoot this type of equipment.
1.1 SAFETY WARNINGS IN THE MANUAL
The following safety warnings are used in the manual:
DANGER!
The procedures recommended in this warning have the purpose of
protecting the user against death, serious injuries and considerable
material damage.
ATTENTION!
The procedures recommended in this warning have the purpose of
avoiding material damage.
NOTE!
The text intents to supply important information for the correct
understanding and good operation of the product.
1.2 SAFETY WARNINGS IN THE PRODUCT
The following symbols are attached to the product, serving as safety notices:
High voltages are present.
Components sensitive to electrostatic discharge.
Do not touch them.
Mandatory connection to the protective earth (PE).
Connection of the shield to the ground.
Hot surface.
6 | DBW03