Technical Data - Dräger X-am 2500 Instrucciones De Uso

8

Technical data

Excerpt See the Technical Handbook for details
Ambient conditions:
During operation -20 to +50 °C with NiMH power pack types:
and storage HBT 0000 and HBT 0100,
alkaline single cell type:
Duracell Procell MN 1500
-20 to +40 °C for NiMH single cell type:
GP 180AAHC
Panasonic LR6 Powerline
0 to +40 °C for alkali single cell types:
Varta 4006
700 to 1300 hPa
10 to 90 % (to 95 % short-term) rel. hum.
Temperature range -40 to +50 °C
over a short period Maximum of 15 minutes with NiMH power pack
2)
: T4 (HBT 0000) or T4 HC (HBT 0100)
Requirement: storage of the instrument at room
temperature (+20 °C) for at least 60 minutes in
advance.
Position of use any
Storage time
X-am 2500 1 year
Sensors 1 year
Electrical IP 67 for instrument with sensors
classification
Alarm volume Typically 90 dB (A) at 30 cm distance
Dräger X-am 2500
1
2
2
and alkaline single cell type:
2 2
, Varta 4106 ,
Operating time:
Alkaline battery Typically 12 hours under normal conditions
NiMH power pack:
T4 (HBT 0000)
T4 HC (HBT 0100) Typically 12 hours under normal conditions
Typically 13 hours under normal conditions
Dimensions approx. 130 x 48 x 44 mm (H x W x D)
Weight approx. 220 to 250 g
Refresh interval for 1 s
display and signals
1) The Technical Handbook and Instructions for Use / data sheets for the utilized sensors
and the PC software CC Vision for Dräger X-am 2500 can be downloaded on the product
page of the X-am 2500 at the following Internet address:
www.draeger.com
2) Not part of the BVS10 ATEX E 080X and PFG 10 G 001X technical suitability test.
Technical data
35