Brewing Coffee With Coffee Powder - Beem Fresh-Aroma-Perfect Deluxe Version 2 Manual De Instrucciones

Fresh-Aroma-Perfect Deluxe
Brewing coffee with
coffee powder
NOTE
► Activate the display lighting by press-
ing any key. The lighting goes out
60 seconds after the last button was
pressed.
Fill with water as described in the sec-
‹
tion Filling with water (page 26).
Insert the permanent filter as described
‹
in the section Inserting the filter
(page 26). With the help of the meas-
uring spoon supplied (1 level spoon
per cup), fill the filter with the desired
amount of coffee powder.
Press the button (26) to start
‹
brewing coffee.
The power indicator
the coffee is brewed.
When the brewing process has been
‹
completed, the "cup" symbol (21) in the
top left of the display starts flashing.
NOTE
► The appliance switches itself off auto-
matically after 2 hours.
Cancelling the brewing process
Press the button (26) or the
‹
button (21) to cancel the brewing proc-
ess and switch off the appliance. The
power indicator
appliance is switched off.
30
(25) lights up,
(25) goes out, the
Preparing coffee using the preset
timer
NOTE
► To brew coffee using the timer, the
clock must be set as described in the
section Setting the time (page 26).
Programming the preset time
Press the
‹
down for approx. 3 seconds. The power
indicator (24) starts flashing.
Use the button (31) and
‹
ton (32) to set the desired start time.
For brewing coffee with coffee powder:
Also press the
‹
long as the power indicator
continues to flash. The power indicator
(25) lights up.
Fill the water tank with water and the
‹
coffee powder into the permanent filter.
Brewing coffee with coffee beans:
Make sure that the power indicator
‹
(25) does not light up. If neces-
sary, press the
long as the power indicator
continues to flash. The power indicator
(25) goes out.
Set the number of cups, the strength of
‹
the coffee and the grinding fineness.
BEEM - Elements of Lifestyle
EN
button (23) and hold it
but-
button (26) as
(24)
button (26) as
(24)