La Marzocco Swift EPSB Manual De Uso página 35

Cleaning proceedure
Changeofgrindingdiscs
1. Disconnect power supply from the
coffee machine, stop bean flowing
into the grinder and if necessary
dismantle the grinder.
2. Release clamp [1] and remove it.
3. Turn stationary discs flange [3] anti-
clockwise and take it off.
4. Unscrew the grinding discs
(3 screws [4]) from the stationary-
and rotary disc flanges. Do hold/
block the rotary disc flange [4a] with
a plastic tool.
Cleaning
Use a brush to clean the surfaces of the
flanges. Remove all coffee particles or
dust from the thread and than lubraca-
te it with slight film (spray) of Panolin
TEF GREASE H1, Prod. 5975, food
grade, NSF listed; www.panolin.com
www.lamarzocco.com
5. Insert new grinding discs on the
cleaned rotary- / stationary disc flan-
ges and tighten screws carefully.
6. Re-install the statonary disc flange
[5] clock-wise (avoid touching of the
grinding discs).
7. Connect power supply.
8. Calibrate grinder.
Important: All surfaces of the grinding
discs as well as the flanges
must be properly cleaned
in order to ensure a perfect
grinding.
33