Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Erase a call from the caller ID list
1. The
keys are used to transfer to the
caller ID list.
2. The
keys are used to find the num-
bers to be erased in the list.
3. Press »Option« and select »Delete«. This
means that the entry is erased.
Erase all calls from the caller ID list
1. The
keys are used to transfer to the
caller ID list.
2. The
keys are used to find the num-
bers to be saved in the list.
3. Press »Option« and select »Erase all«.
This means that all entries are erased.
Display calls received during absence
An option that displays calls in absence with
a red flashing letter symbol is available. If
this is desired, then it can be switched over
on the right side of the Base with the switch
»New call« (letter symbol).
Setup screen display (BS)
Set display language
1. Press the »Menu« key to get to the setup
menu.
2. Select »Set display« and confirm with
»Select« by using the
3. Select »Set language« and confirm with
»Select«.
4. Set the desired language with
language will be selected with »Select«.
Adjust screen contrast
1. Press the »Menu« key to get to the setup
menu.
2. Select »Set display« and confirm with
»Select« by using the
3. Select »Set contrast« and confirm with
»Select«.
4. Select the desired contrast (1-8) with
and the contrast will be set with »Select«.
Set the presentation of the numbers input
If you type the numbers and if the quantity
of the numbers exceeds 8 digits, then the
number will be displayed in a smaller font on
the display to ensure that all numbers are
shown. Please follow the instructions when
setting this function:
1. Press the »Menu« key to get to the setup
menu.
2. Select »Set display« and confirm with
»Select« by using the
3. Select "Dim: X--->x and confirm with »Se-
lect«.
4. Select with
to decide whether you
want to switch this function on or off.
keys.
and the
keys.
keys.
English 61
Publicidad
Capítulos
Tabla de contenido
