Set The Language For Set Talk; Red Indicator For Missed Calls / New Messages; Answering Machine Tam (Bs); Switch Answering Machine On - HumanTechnik scalla3 combo Manual De Instrucciones

Set the language for set talk.

You can set the language that will be read
to you. A maximum of three languages are
available.
1. Press the »Menu« key to get to the setup
menu.
2. Select »Set Talk« with the
confirm with »Select«.
3. Select »Language« and confirm with
»Select«.
4. Use to set the desired language and
confirm with »Select«.
Red indicator light for missed
calls / new messages
It is possible to indicate calls in absence
and new messages on the answering
machine with a flashing red symbol.
If this is desired, this function can be acti-
vated on the right side of the base with the
»New call« button (letter symbol).
The red indicator only goes out when:
- The caller ID list has been viewed
(see page 61)
- All new messages of the answering ma-
chine have been listened to (see page 66)

Answering machine TAM (BS)

The phone includes an integrated answe-
ring machine.
It can be controlled by the Base or the mo-
bile unit.
The following describes the control from the
base (BS).
64 English

1) Switch answering machine on

1. Press the »Menu« key to get to the setup
menu.
2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "TAM ON/OFF" and confirm with
keys and »Select«.
4. Use
confirm with »Select«.

2-1) Playback outgoing message

1. Press the »Menu« key to get to the setup
menu.
2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "Outgoing Msg" and confirm with
»Select«.
4. Select "Play OGM" and confirm with »Se-
lect«. The message will be played.

2-2) Record outgoing message

Speak in the direction of the microphone du-
ring recording. Keep a distance of app. 20
cm to achieve the best results.
1. Press the »Menu« key to get to the setup
menu.
2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "Outgoing Msg" and confirm with
»Select«.
4. Select "Record OGM" and confirm with
»Select«. The display shows »Recor-
ding«. Speak your message loud and
clearly into the answering machine and
complete the recording with »End«.
The recording stops automatically if you
speak longer than 3 minutes.

2-3) Edit outgoing message

You can set the phone to the standard mes-
sage or to the message that you recorded.
1. Press the »Menu« key to get to the setup
menu.
keys.
to switch the function on/off and
keys.
keys.