Define Security Id For Sos; Additional Connections (Bs); Connecting Socket For Vibration Pad And/Or Module; Headset Connection - HumanTechnik scalla3 combo Manual De Instrucciones

1. Select "SOS autom on" and confirm with
»Select«.
Use to switch the function on/off and
confirm with »Select«.

Define security ID for SOS

1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
3. Select "Security ID" and confirm with
»Select«.
4. Enter your security ID and press »Save«.
68 English
keys.

Additional connections (BS)

Connecting socket for vibration pad and/
or module
Your phone includes a connection socket
for vibration pads or supplementary signal
generator modules. This means that a recei-
ved call will not only be signaled by a very
loud, adjustable ringer tone and a very bright
optical display but also through an optionally
available vibration pad and/or module.
In addition to the acoustic call display you
can choose whether the call will be additio-
nally signaled through vibrations or optically
with vibrations. Slide the signal selector
switch (at the rear of the phone) to one of
three possible positions to select the desired
signalization type.
- Switch on the left: optical with signal
through a connected vibration pad and/
or module
- Switch in the center: only signals through
a connected vibration pad and/or module
- Switch on the right: only optical
The following, optionally available auxiliary
modules can be connected to the phone:
- Flash module
- Switch module
- Acoustic module

Headset connection

Standard headset with a 2.5 mm jack bush.

Headphone connection

Head phone output (3.5 mm jack bush) to
connect a tele-loop, a headphone or similar.