Wall Mounting - HumanTechnik scalla3 combo Manual De Instrucciones

Wall mounting

1. Slide the bracket for the phone receiver
from its position and rotate it by 180 de-
grees. Afterwards, slide the bracket back
into the original position in such a way the
the bracket nose points upward (see figu-
re 2). This prevents a falling of the recei-
ver from the receiver cradle if the phone is
wall mounted.
Bracket for the phone receiver
Position for table
installation
2. Place 2 screws (not included in delivery)
directly one above the other at a distance
of 8 cm on the desired surface.
3. Place the phone onto the screw heads
and slide it downward to secure it (see
figure 3).
Wall installation of the phone
2.
1.
Screw head
1.
Position for wall
mounting
English 69