Voice Output Mobile Unit; 11) Select Base; Set Date/Time (Mu); Set Time - HumanTechnik scalla3 combo Manual De Instrucciones

10) Set date/time (MU)

10-1) Select date format

1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select »Date Format« and confirm with
»Select«.
4. Using , choose between DD-MM-YY
and MM-DD-YY and press »Save« to
complete the setup.

10-2) Set hour format

1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select »Time format« and confirm with
»Select«.
4. Using , choose between 12 and 24
hours and press »Save« to complete the
setup.

10-3) Set time

1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select »Date & time« and confirm with
»Select«.
4. Select »Set Time« and confirm with »Se-
lect«.
5. Enter the time through the dial keys and
press »Save« to complete the setup.

10-4) Enter date

1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select "Date & time" and confirm with
»Select«.
4. Select "Set date" and confirm with »Se-
lect«.
5. Enter the date through the dial keys and
press »Save« to complete the setup.

11) Select Base

You can select a Base on which a mobile
unit has already been registered. You can
only select Bases, which are already regis-
.
tered on the mobile unit.
1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select »Base« and confirm with »Select«.
4. Choose between the different Bases with
Base will now be searched and setup.
.

Additional functions (MU)

Keyboard lock (MU)

If this function is selected, then all keys ex-
cept
You can receive incoming calls with
you end the call with
returns to the locked mode.
Switch lock on: Press the
»HS Locked« is shown on the display. A
.
key symbol will be shown on the display. To
de-activate the lock, press
symbol on the display disappears.

Switch vibration and flash on

In addition to the ringer tone, you can switch
the vibration alarm and flash on.
For this purpose, press the
conds to switch vibration and flash on.
Please follow the same instructions when
switching the function off again.
.

Flashlight

The phone includes a flashlight function.
Press the
flashlight on.
Please follow the same instructions to
switch the flashlight off again.
and confirm with »Select«. The desired
are locked and not functioning.
key for 3 seconds to switch the
.
. If
, then the phone
key until
until the key
key for 3 se-
English 77