Register New Mobile Unit; Reset Mobile Unit To Default; Internal Calls; Call Connections Between Mobile Units - HumanTechnik scalla3 combo Manual De Instrucciones

Register new mobile unit

The delivered mobile unit is already registe-
red with the Base. It is registered as mobile
unit 1. Each additional mobile unit that you
purchase must first be registered with the
Base station.
Up to 5 mobile units can be registered with
the Base station. Internal calls between mo-
bile units are possible. Incoming calls can
be transferred to other mobile units.
Up to 4 Base stations can be registered
with each mobile unit. This increases the
range of the phone, which means that you
can move between the phone transmission
ranges.
Please follow the instructions to register a
new mobile unit:
1. Press the search key
app. 5 seconds. The remaining process
will be completed on the mobile unit.
2. Press the »Menu« key and select the
»Registration« entry with
3. Press »Select«.
4. Select the desired base with
firm with »Select«. The Base station will
now be searched and the mobile unit will
be registered.
5. Enter the PIN code (default is 0000).
6. A registration tone sounds if the PIN code
is accepted and the Base assigns a num-
ber to the mobile unit. A warning tone
sounds if the PIN code is wrong and the
unit returns to the previous registration
status. You can enter the PIN code again.
78 English
on the Base for
.
and con-

Reset mobile unit to default

The mobile unit can be reset to its default
state:
1. Press the »Menu« key and select the
»Default« entry with
2. Press »Select«.
3. Enter the PIN code (default is 0000).
4. A registration tone sounds if the PIN code
is accepted and the mobile unit is reset to
default. A warning tone sounds if the PIN
code is wrong and the mobile unit returns
to the previous menu.
Please note: The ID list and all individual
settings will be lost. However, the phone
book entries are not affected.

Internal calls

You can conduct internal calls or transfer ex-
ternal calls between mobile units if several
mobile units are registered to one base.
Please follow the instructions to conduct an
internal call:
1. Press the key
2. Enter the desired mobile number bet-
ween 1 and 5.
Dialing 9 means that all mobile units will
be called. The mobile unit issues a war-
ning tone if you enter a wrong number.
The number of the calling mobile unit will
be shown on the display if you receive an
internal call.

Call connections between mobile units

An internal call can be transferred from one
mobile unit to another.
Follow the steps:
1. Press the key
during a call. The external caller will be
put into a waiting loop.
2. Enter the desired mobile number bet-
ween 1 and 5.
3. The dialed mobile unit will ring. The name
of the dialing mobile unit will be shown on
the display.
4. Receive the call with
.
on the mobile unit.
on the mobile unit
.