Ottobock 6A43 Instrucciones De Uso página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
5.1.4 Laminating a Transfemoral Socket
Required tools and materials:
>
99B81=100X26X5 and 99B81=130X26X5 PVA Bag, 623T3=12 or
623T3=15 Perlon Stockinette, 81A1=12 or 81A1=15 Tube Sock,
616B1=50x* Carbon Fibre Cloth Strap, 616G2 Carbon UD Hose,
616G15 Carbon Fibre Woven Hose, 617H119 Orthocryl Lamination
Resin 80:20 PRO, string
1) Prepare for fabrication of the prosthetic socket (Preparing for Socket
Fabrication).
2) Soak the shorter PVA bag and pull it over the plaster positive.
3) Pull a layer of Perlon stockinette over the plaster positive.
4) Place a layer of carbon fibre cloth strap circularly 3 cm below the peri­
neum.
5) Place a layer of carbon fibre cloth strap medially and laterally as well as
anteriorly and posteriorly from the shuttle lock up to the circular carbon
fibre cloth strap.
6) Place a layer of carbon fibre cloth strap circularly 3 cm below the peri­
neum.
7) Cut two pieces of carbon fibre cloth strap (length approx. 20 cm).
8) Form the carbon fibre cloth straps into Vs by folding them in the middle
and position them in the area of the tuberosity support.
9) Pull a tube sock over the plaster positive.
10) Loop a piece of string around the lamination adapter in the groove and
tie tightly.
11) Cut a piece of carbon UD hose (1.5 times the length of the plaster posit­
ive).
12) Pull the carbon UD hose over the plaster positive up to the socket edge.
Tie the upper section of the carbon UD hose and fold the remaining
length over the plaster positive.
13) Loop a piece of string around the lamination adapter in the groove and
tie tightly.
14) Pull a tube sock over the plaster positive.
15) Cut a piece of carbon fibre woven hose (1.3 times the length of the
plaster positive).
16) Pull the carbon fibre woven hose over the plaster positive to the socket
edge. Tie the upper section of the carbon fibre woven tube and fold the
remaining length over the plaster positive.
17) Cut a piece of Perlon stockinette (twice the length of the plaster posit­
ive).
Ottobock | 19

Publicidad

Tabla de contenido
loading

Tabla de contenido