ROHO DRY FLOATATION Wheelchair Cushions Operation Manual
Important Safety Information, continued
Warnings, continued
- DO NOT use your cushion on top of, or in conjunction with, any other products or materials,
except as indicated in this manual. Doing so may cause the individual to become unstable
and vulnerable to falling.
- DO NOT place any obstructions between the individual and the cushion. USE ONLY a
compatible cover with the cushion; placing any other item directly under the individual,
whether inside or outside the cover, will make the cushion less effective.
- DO NOT use your cushion as a water flotation device (e.g., a Life Preserver). It will NOT
support you in water.
- Use caution when handling the cushion: Metal grommets on the corners may be a finger trap
hazard.
- DO NOT expose your cushion to high heat, open flames or hot ashes. Testing or certification
claims, including for flammability, may no longer apply to this device when it is combined
with other products or materials. Check testing and certification claims for all products used
in combination with this device.
- The cushion surface will acclimate to the surrounding temperature. Take appropriate
precautions, especially when the cushion will contact unprotected skin.
- If you are unable to perform any tasks described in this manual, seek assistance.
Cautions
- Using a pump, cover or repair kit other than those compatible with your product may void your
product's warranty.
- DO NOT modify the cushion or any components. Doing so may result in damage to the product
and will void the warranty.
- DO NOT allow your cushion to come into contact with oil-based lotions or lanolin. They may
degrade the material.
- Prolonged exposure to ozone may degrade materials used in the cushion, affect the performance
of the cushion, and void the product warranty.
- Changes in altitude may require adjustment to your cushion.
- Keep your cushion away from sharp objects.
- If the cushion has been in temperatures lower than 32° F
(0° C) and exhibits unusual stiffness, allow the cushion to
warm to room temperature.
- Periodically, check the cover and components for damage
and replace if necessary.
- DO NOT use an inflation valve or ISOFLO Memory Control
as a handle; the product may tear. Carry by the cushion
base or by the carrying handle on the cover.
This symbol means, "DO NOT use the
ISOFLO Memory Control as a handle;
the product may tear."
3